Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Weston Homeowners
A door that shudders, sags, or has been patched one panel too many stops being a door and becomes a daily negotiation. For most Weston homeowners the tipping point arrives quietly: the opener strains on the last foot of travel, the bottom section has rusted through at the stile, or the door has simply aged out of the style the rest of the house wears. That is where installation begins, not a rushed sale of whatever box is on a pallet. Our technicians have up to 8 years of experience installing single and double car doors, custom sizes, and steel or wood sections, and we work on your brand – Genie, Clopay, Amarr, Wayne Dalton and the rest of the majors. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 930-4137 for a free measure and a written price.
What Our Garage Door Installation Service Includes
New Door Installation
A new door install replaces the whole assembly, not just the panel that failed: sections, track, torsion or extension springs, rollers, hinges, and the brackets that tie it into the framing. You need this when the door has reached the end of its useful life, when the opening has been widened, or when a builder-grade door simply cannot be repaired economically. We measure the opening, confirm the headroom and jamb conditions, and set the door to sit level and close tight against the weatherstrip.
Single Car Door
A single car door covers roughly an 8 or 9 foot opening and is the most common size in Weston’s townhome and villa communities. Replacement makes sense when the original door has warped, when the springs no longer balance the weight, or when you want the opener to work with a quieter, better-insulated door. We match the door to the opening height and confirm the panel count keeps the proportions right for the elevation.
Double Car Door
A double car door spans 16 feet or more, and at that width the hardware matters as much as the panel. You need double door installation when the existing door has cracked at the center stile, when the torsion system has been undersized from day one, or when a remodel opens up the front of the house. We check the header, the jamb plumb, and the spring sizing so the door lifts with a smooth pull instead of a fight.
Custom Garage Door
Custom work covers non-standard widths, unusual heights, arched or radius tops, and openings that were framed for something other than a stock size. This is the right route when the house has a distinct elevation, a carriage-style front, or a masonry arch that a stock door would leave looking patched. We take the measurements on site, confirm how the door will sit within the reveal, and specify the panels and track to fit that opening rather than trimming a standard door to make it work.
Steel Doors
Steel is the workhorse material for this climate, and it holds up well as long as the finish stays intact and the bottom section is not sitting in standing water. You will want steel when you need a lighter door that the opener handles easily, when the budget calls for a clean painted finish, or when insulation matters for a room above the garage. We install steel sections with the correct gauge for the opening width and set the bottom seal so rain running off the apron does not wick into the panel.
Wood Doors
Wood doors bring a depth of finish that steel cannot match, and they suit the Mediterranean and British West Indies elevations common around Weston. Wood is the right call when the front of the house calls for a stained or painted carriage look, when the door is a design feature rather than a utility, and when you want a section that can be repaired later instead of replaced whole. We install solid wood and wood-composite sections, seal the end grain before the door goes up, and confirm the spring system is sized for the extra weight wood carries.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on Clopay doors and know where their sections wear: the bottom panel takes the weather, the hinges carry the load at the joints, and the finish on a lower-grade model will fail first along the bottom rail. We install Clopay in the sizes and insulation values that fit Weston openings, and we tell you plainly when a repair makes more sense than a swap. Amarr is another line we handle regularly, and its heavier steel sections demand a torsion system sized to match, which is where a lot of sloppy installs go wrong.
Wayne Dalton doors show up on plenty of homes here, and we know how their panel profiles and hardware fit together so a replacement sits flush without shimming. Genie openers are on our list too, since the opener and the door have to be matched for travel limits and force settings. Whether you have Genie, Clopay, Amarr, Wayne Dalton or any other make, we can help.
Signs You Need Garage Door Installation Right Now
- The door looks like a patchwork. Multiple panels, mismatched colors, and hardware that no longer lines up all point to a door that has been repaired past the point of sense. A new door restores the look of the front elevation and ends the cycle of small fixes.
- Sections are cracked, split, or rusted through. A crack in a steel panel or a split in a wood stile weakens the door’s structure, and once water gets into a rusted bottom section it will not stop. Replacing the door is the honest answer when the damage runs across more than one section.
- The door no longer closes tight. Gaps along the sides or bottom let air, water, and insects in, and they get worse as the door racks out of square. A properly installed door with fresh weatherstrip seals the opening again.
- The opener is working harder than it should. A straining motor, a door that reverses on its own, or one that slams down are signs the door’s weight and the spring system are out of step. That combination usually means the door and its hardware have reached the end of their service life together.
- You are remodeling the front of the house. New siding, a new driveway apron, or a repainted elevation can leave an old door looking like an afterthought. Installing a door that matches the new work is simpler than trying to make the old one blend in.
Our Garage Door Installation Process – Step by Step
- 1
Measure and assess on site. We check the opening width and height, the headroom above the door, the jamb plumb, and how the door will sit relative to the driveway apron. We look at the framing and the spring anchor point, because a door that is too heavy for the existing anchor will never run right.
- 2
Recommend the door and hardware. We walk you through steel, wood, and custom options, explain how insulation and panel count change the price, and name the brand and model we would put up. You get a written price before anything is ordered, and the price you agree to is the price on the invoice.
- 3
Order and schedule. Once you approve, we order the door in your chosen size, color, and material, and schedule the install. Installation is planned work, not an emergency call, so we book a slot that fits your week rather than promising same-day turnaround on a door that has to be ordered.
- 4
Remove the old door and set the new one. We take down the old sections, track, and springs, inspect the framing while it is exposed, and install the new track and door plumb and level. Springs get set to the door’s actual weight, which is the step that determines how the door feels for the next decade.
- 5
Test, adjust, and walk you through it. We run the door through a full cycle, check the balance, set the opener travel and force limits, and confirm the safety reverse works. Then we show you the manual release and explain what to watch for over the first few months.
If your door fails before the install date, call us for garage door repair so the opening stays secure in the meantime.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Weston?
A typical new door installation in Weston runs $700 – $2,200, depending on the size, material, and insulation of the door you choose. A single car steel door sits at the lower end of that range, while a double car or a custom wood door pushes toward the top. Opener installation, when you are replacing the motor at the same time, runs $250 – $550 and is quoted separately so you can see exactly what each piece costs.
Several things move the number. Door width and height matter, since a 16 foot double door uses more sections and heavier hardware than a single. Material matters more: steel is the most economical, wood and custom profiles cost more, and insulation adds to either. The condition of the opening matters too, because a header that needs work or a jamb that is out of plumb adds labor that has nothing to do with the door itself.
To avoid overpaying, get a written estimate that lists the door, the hardware, the springs, and the labor separately rather than one lump figure. Ask what happens if the opening needs adjustment once the old door comes down. A free estimate should include the on-site measure, a clear door recommendation, and a price that holds. Call (844) 930-4137 for your free measure and written quote.
Garage Door Installation Near Weston – Our Service Area
We take installation work across Weston and the surrounding communities, including Southwest Ranches, Pembroke Pines, Davie, Cooper City, Plantation, Miramar, Sunrise, Tamarac, Lauderhill, Broadview Park, and Palm Springs North. Installation is scheduled work, so we book your measure and install around your week. If you are nearby and comparing options, our garage door installation page covers the Southwest Ranches side, and we also handle garage door installation for Pembroke Pines homeowners.
Serving Weston, FL – Our Local Coverage Area
We serve Weston and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Weston
Garage door installation is the full replacement of your door and its operating hardware: the sections, track, springs, rollers, hinges, and the brackets that anchor it to the framing. It is different from a repair, which fixes one failed part on a door that is otherwise sound. We measure the opening, recommend the right door for it, and set the whole assembly so it runs balanced and closes tight.
A standard single or double car door install usually takes a few hours once the door is on site. Custom doors and wood doors can take longer because the sections need more fitting and the finish needs care. The bigger variable is the order: a stock door arrives faster than a custom profile, so we give you a realistic install date when you approve the written estimate.
A typical new door installation in Weston runs $700 – $2,200, and opener installation runs $250 – $550 when you replace the motor at the same time. Size, material, insulation, and the condition of the opening all move the number. The written estimate sets the final price, and the price is agreed before any work starts. Call (844) 930-4137 for an exact quote – estimates are free.
Yes. We install and service Clopay and Amarr doors, along with Wayne Dalton and the opener side from Genie. Knowing how each brand’s panels and hardware fit together means the door goes up correctly the first time and the right parts are on hand if something needs adjusting. If you are unsure what brand you have, we can identify it on site.
Same-day service is available for repairs when the door is stuck or unsafe. Installation is scheduled work, so we book it around your week rather than promising same-day turnaround. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the work and will walk you through what the door manufacturer covers and what our installation covers before the job is scheduled. The details depend on the door you choose, so ask when you get your written estimate. If something is not right after the install, call us and we will come back out to correct it.
Clear the garage floor around the door and move anything stored against the walls near the track. Make sure the driveway is clear on the day so the old door can come down and the new one can be brought in. If you have vehicles that normally park in front of the garage, plan to move them before the crew arrives.
Schedule Your Garage Door Installation Service in Weston Today
Whether you are replacing a worn single door, upgrading to a double, or ordering a custom wood door for a remodel, we can measure it, price it, and install it without a second vendor. Call (844) 930-4137 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work begins.
Written by the team at Garage Door Repair Weston Pros.