Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Sunrise
If your garage door won’t lift, hangs halfway, or the opener hums while nothing moves, a broken spring is the usual culprit. We handle garage door spring repair throughout Sunrise, from the older tract homes around Sunrise Lakes to the villas off Oakland Park Boulevard, and we know how these doors fail here. One call to (844) 930-4137 gets a trained technician headed your way. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and a free estimate before anything gets touched.
Why Sunrise Homeowners Call Garage Door Repair Weston Pros for Garage Door Spring Repair
Sunrise is our backyard, and we’ve spent enough time in its neighborhoods to recognize a spring problem before we even walk up the driveway. Our technicians have up to 8 years of experience, and they work on high-tension torsion and extension springs every week, the job a lot of general handymen turn down. We’re familiar with the equipment that actually lives in Sunrise garages: Clopay and Wayne Dalton doors, plus the LiftMaster and Genie openers that came with so many of these builds.
When you call with a snapped spring, a real person answers, and we line up a visit that fits your day rather than a slot next week. Spring repair is priced per job and quoted before work starts, so you’ll know the number going in. Our local techs also know the quirks of Sunrise’s 55+ communities, where the same builder door repeats down a whole street and matching the owner’s palette matters. That familiarity is why neighbors pass our name along to each other.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Sunrise
Springs are the parts that carry your door’s weight, and when they let go, the whole door stops behaving. Here’s what we handle in Sunrise.
Torsion Spring Replacement
The torsion spring mounted above the door is the one that usually snaps first on these older homes. We replace it with a correctly sized spring rated for the door, then balance everything and check the drums and cables before we leave. A typical torsion spring replacement in Sunrise runs $180 – $340 for a single spring, and a matched pair is usually replaced together at about twice that.

Extension Spring Replacement
Some Sunrise doors, especially older single-car units, use extension springs that stretch along the tracks. These rust out and break with age like their torsion cousins, and we swap them as a balanced pair so the door lifts evenly. Extension spring replacement in Sunrise typically runs $180 – $340.

Broken Spring Repair
When a steel spring fails after years of the local humidity, you’ll hear a bang or find the door stuck open or shut. We diagnose whether it’s the spring or the opener, source the correct part, and get the door moving again. A full spring repair job in Sunrise is usually estimated at $180 – $340.

Spring Adjustment
Sometimes the spring is intact but out of balance, and the door feels heavy or drifts on its own. We adjust the tension and set the door so it lifts and lowers cleanly. Spring adjustment in Sunrise is typically estimated at $180 – $340.
Trusted Brands We Service in Sunrise
We service equipment from Clopay, Amarr, Wayne Dalton, Craftsman, LiftMaster, Chamberlain, Genie, and Raynor, and that brand familiarity means we diagnose faster and pull the right part the first time instead of forcing a universal workaround. Sunrise garages are full of these names, from the original builder doors to the openers installed a decade later. If your panel is a Clopay model that came with the house or your opener is an older Craftsman that still runs, we know how it’s built and what it needs. We don’t stock parts, so we identify what’s wrong on the visit and order the exact replacement, keeping the turnaround tight.
Common Garage Door Spring Repair Problems We See in Sunrise Homes
- Snapped steel springs in 1990s homes. The original torsion springs in Sunrise Lakes and similar tract communities reach the end of their cycle count and fail, often leaving the door stuck open for hours until help arrives.
- Rusted bottom sections and hinges. Years of heavy rain and muggy air chew through builder-grade steel, which throws off the door’s tension and wears the cables.
- Stripped opener gears. When a spring is failing and the owner keeps running the opener, the motor strains against a door it was never meant to lift alone, and the gears give out.
- Uneven, drifting doors. A single spring doing more work than it should makes the door lift crooked, which stresses the tracks and rollers over time.
How Sunrise’s Housing Shapes This Work
Sunrise’s garage door work is shaped by how the city was built. Most of the housing is one- and two-story CBS and stucco single-family homes and villas from the 1980s and 1990s, many in master-planned communities like Sawgrass and Sunrise Lakes, and they went up with standard 16×7 or 9×7 openings and original steel or wood-composite doors. Those doors are now at end of life, and the failures come in waves rather than one at a time.
Here’s what makes it specific to Sunrise. In communities like Sunrise Lakes, whole streets share identical builder-grade steel doors in the same factory color. So when one spring snaps, the ones a few doors down are usually close behind, riding the same cycle count. That clustering rarely happens in neighboring cities with more varied or newer housing. It also means replacement work has to respect the community’s uniform color palette, and anyone swapping a full door has to meet Miami-Dade County wind-load standards on the replacement. We plan for both: matching panels where the rules call for it, and high-cycle springs rated at 25,000 cycles and up so the next failure is a long way off.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Spring Repair in Sunrise, FL
We keep spring pricing simple. A torsion or extension spring replacement in Sunrise is typically estimated at $180 – $340 for one spring, and since a matched pair is usually replaced together, a pair runs about twice that. Safety cable installation, which keeps a broken spring from whipping through the garage, typically runs $130 – $250. The written estimate sets the final price, and it’s quoted before any work starts, so there’s no invoice surprise waiting for you.
| Service | Typical Estimated Range in Sunrise |
|---|---|
| Torsion Spring Replacement (one spring) | $180 – $340 |
| Extension Spring Replacement (one spring) | $180 – $340 |
| Safety Cable Installation | $130 – $250 |
| Spring Adjustment | $180 – $340 |
What moves the number: single versus pair, the spring’s cycle rating, whether cables and drums need attention, and whether rust has reached the bottom section or hinges. Estimates are free, so ask for one.
We Also Serve Cities Near Sunrise
We cover Plantation, Lauderdale Lakes, Lauderhill, and Tamarac alongside Sunrise, so if you’re just over the city line, call anyway and we’ll sort out the visit. Spring repair is priced the same way there: estimated per job, quoted before we begin. Same brand familiarity, same free estimate, same one call for door and opener.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Sunrise
If the opener strains or hums but the door barely moves, and you can lift the door a few inches by hand and it feels extremely heavy, the springs are the problem, not the motor. The springs carry the door’s 150 – 350 pounds; once one breaks, the opener alone can’t lift it. Call (844) 930-4137 and we’ll confirm on site.
Ask for a high-cycle spring rated at 25,000 cycles and up. With year-round humidity and heavy rain working on steel, the extra cycle rating buys you real time between replacements, and we balance the door and lubricate the tracks and hinges so the springs last. Call for an estimate on a high-cycle upgrade.
Yes. In Sunrise Lakes and similar communities, whole streets share the same factory color, so we match replacement panels to your community’s palette rather than dropping in whatever’s on hand. Panels run about $250 – $500 typically, and we’ll fold matching into the estimate. Call (844) 930-4137 to set a visit.
Builder-grade springs from that era carry a limited cycle count, and the salt-laden humidity speeds up corrosion, so they fail on a shorter clock. Upgrading to a high-cycle spring and keeping the hardware lubricated stretches the interval. We’ll tell you what rating fits your door and give you a free estimate.
No. Stop running the opener. The springs carry the door’s weight, so a motor working against a broken spring can snap cables, strip its own gears, or drop the door, and high-tension springs are not something to handle without training. Keep people clear of the door and call (844) 930-4137.
Get Your Spring Fixed in Sunrise
A broken spring stops your whole day. Call (844) 930-4137 for a free estimate on garage door spring repair in Sunrise. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the price is quoted and agreed before any work starts. One call covers the spring, the cables, the door, and the opener.
Written by the team at Garage Door Repair Weston Pros.